Mar 11
The goal of this tutorial is to teach you how to modify your ArdsimX Arduino code for 3rd party libraries and utilize somewhat more external electronics in your sim. Our task here is to add an LED bar graph trim tab to work with X-Plane 11 to show us where the trim elevator is currently …
Permanent link to this article: https://m1sims.com/2018/03/11/ardsimx-tutorial-2-elevator-trim-led-bar/
Mar 06
Having the ability to control time of day in X-Plane is a fun and helpful feature. It took a lot of research to figure this out, so I thought it would be a great first step in using ArdsimX in a fun way. In my sim, I find it more fun to fly at sunrise …
Permanent link to this article: https://m1sims.com/2018/03/06/ardsimx-tutorial-2-x-plane-time-machine/
Mar 05
This tutorial series is meant to teach some basics and more advanced features of using ArdsimX. I won’t waste your time going through setup and installation, as it’s all located on the SimVim site. It’s very simple and the SimVim site is full of great info. After many emails back and forth with Vlad and …
Permanent link to this article: https://m1sims.com/2018/03/05/ardsimx-tips-and-datarefs/
Feb 03
Working on creating a few custom panels lately. The goal is to create a transponder and autopilot, using the Glowforge for front panels and and Arduino Uno or Mega with ArdsimX to interface with X-Plane. Still need to figure out how to create a good button panel circuit board, that’s next on my list. I …
Permanent link to this article: https://m1sims.com/2018/02/03/transponder-lcd-programming/
Jan 01
I’ve taken the last couple days of down-time to study up on using the wonderful app, Fritzing, to help me design custom interface circuit boards for better back panel connections. Although the front of the sim looks pretty great right now, the back is a spaghetti mess of wires and dodgy soldered connections. Here’s a …
Permanent link to this article: https://m1sims.com/2018/01/01/spaghetti-wiring-problems/
Aug 15
I’ve been trying to design my own motion platform for awhile now. Before starting on the mechanics, which is the hard part for me as I’m not that mechanically inclined. I started with electronics design and communication from X-Plane. I chose to start with the ArdSimX Interface for communication to control stepper motors, based on …
Permanent link to this article: https://m1sims.com/2017/08/15/motion-platform-notes/
Jul 14
Weeks of work went into this upgrade. I redesigned the main panels in Adobe Illustrator and cut them on the CNC (only 6 tries to get it right this time).Each panel was designed meticulously using Autodesk Fusion 360, which has become my new go-to for anything that needs to be 3D printed or CNC cut/engraved. …
Permanent link to this article: https://m1sims.com/2017/07/14/flight-simulator-build-3-3d-printed-instruments-and-custom-electronics/